РАБОТИМ УСЪРДНО

И ТОВА НИ ДОСТАВЯ УДОВЛЕТВОРЕНИЕ



CommBoard BF516 Board Features:

Тази платка е базирана на процесор за цифрова обработка на сигнали Blackfin ADSP-BF516 на формата Analog Devices. Тя поддържа разработка със стандартната интегрирана среда за разработка на фирмата Analog Devices, както и приложения базирани на ucLinux.

400 MHz (800 MMACS) Analog Devices Blackfin ADSP-BF516 Processor
SDRAM IS42S16160B 4M x 16 x 4 Banks, 166 MHz
MCP130 Microcontroller Supervisory Circuit
FAN2012 1.5 A, Low Voltage Buck Regulator
Standard JTAG Connector
SPI FLASH AT45DB161B
2 External I/O Headers (40-pin - 2 x 20 x 0.1")
Board Dimensions: 10x10

Feature MCU PINOUT
On-Chip Memory 2 2
UART 3 3
SPI 3 3
I2C 2 2
PPI 2 2
USB 1 host, 1 device 1 host, 1 device
SD/MMC 1 - with SDHC support 1 - with SDHC support
Integrated ADC 12 channel 10 bit 12 channel 10 bit
On chip real time clock yes yes
On chip watch-dog timer yes yes
Power Requirements 2 2
Power Requirements 2 2





AT91SAM9G10 Board Specs:

Платката разполага с 32 MB външна SDRAM памет и Atmel Data Flash свързана чрез SPI интерфейс. На платката е разположен слот за microSD карта, която е тествана с 1GB, 2GB, 4GB и 8GB карти. Платката е базирана на процесора AT91SAM9G10, който е с ARM926EJ-S™ ARM® Thumb® ядро със следните възможности:

293 MIPS at 266 MHz
DSP Instruction Extensions
ARM Jazelle® Technology for Java® Acceleration
microSD Card Support tested with 1GB, 2GB, 4GB and 8GB cards
32 MB External SDRAM
Atmel Data Flash on SPI bus (variable size)

Feature MCU PINOUT
On-Chip Memory 16kB RAM and 32kB ROM 16kB RAM and 32kB ROM
UART 3 3
SPI 1 (in use) 1 (in use)
I2C/TWI 1 1
PPI 2 2
USB Host 2 2
USB Device 1 1
SD/MMC 1 - with SDHC support 1 - with SDHC support
I2S 1 1
On chip watch-dog timer Yes Yes
LCD Display Support Yes, limited to STN Yes, limited to STN
Power Requirements 3.3V 3.3V

AT91SAM9G10 Board Features:

266 MHz, ARM926-based microprocessor AT91SAM9G10 by Atmel
Slot for micro SD Card
64-megabit DataFlash
256-MBIT SYNCHRONOUS DRAM
Dimensions: 10x10






LPC 2364 Board Features:

Платлата е базирана на комуникационния микропроцесор LPC 236x на фирмата NXP.

72 MHz ARM7TDMI-S processor LPC2364/65/66/67/68
256K I2C Serial EEPROM
Standard JTAG Connector
MCP130 Microcontroller Supervisory Circuit
Dimensions: 10x10

Feature MCU PINOUT
On-Chip Memory 128kB FLASH, 34kB SRAM 128kB FLASH, 34kB SRAM
UART 4 4
SPI 3 3
I2C 3 3
I2C 1 1
CAN 2 2
USB 1 device 1 device
SD/MMC NO NO
Integrated ADC 12 channel 10 bit 12 channel 10 bit
On chip real time clock yes yes
On chip watch-dog timer yes yes
On chip Tiemrs/Counters yes yes
Ethernet 1 in RMII Mode 1 in RMII Mode
Power Requirements 3.3V 3.3V


Copyright 2014 - AP ELECTRONICS - Изследване, дизайн и разработка на цифрова електроника.